Airtraq. Guided video intubation. Where and when you need it.

Characteristics

• Wireless image transmission (When used with the Airtraq Wireless Display Recorder monitor)
• Attachable to every Airtraq model
• Connectable to any external display or monitor which has an available RCA or BNC video input jack.
• Lightweight
  
  

Features

• It can be connected to the Airtraq Wireless Display Recorder or to any other external medical grade monitor which has a composite video input (RCA).
• The Camera automatically transmits images by Radiofrequency at 5.8 Ghz. making it possible to work wireless when using the Airtraq Wireless Display Recorder. Radiofrequency signal is only emitted when the video cable is not connected.
• The Airtraq Camera is powered by its internal rechargeable battery. It does not work when connected to its battery charger.
• Recharging the battery takes approximately 2 hours. After a full charge the camera can operate, under standard conditions, for around 3 hours.
  

Quick Reference Guide

• Switch the Wireless Display Recorder and the Camera ON.
• Select the same channel in both devices.

Cable mode

• Connect the video cable to the Camera Video Out connector. 
• Connect the Composite (RCA) connector to the external monitor Video IN connector. Some monitors may require the RCA/BNC adaptor.
• Switch the Camera ON. To display the Camera image you may also have to switch the video input channel of the external monitor.